News
Fully automatic dispenser for observation with vision function

Fully automatic dispenser for observation with vision function

Dispensing equipment with vision capabilities to complete the dispensing accuracy and efficiency than the desktop machine has more advantages, equipped with vision capabilities of the observation of the automatic dispenser needs to be added to a variety of adhesive control for the operation of the fluid dispensing valve to operate the use, whether it is applied to the application of a single-component epoxy adhesive or coated with a variety of neutral viscosity adhesive applications can be used through the flow of the valve to control the precision of the flow of the effect of the control of adhesive from the PTC adhesive and fingerprint module filler and other needs for precision and quality of the industry can be seen.

06

2023/07

Fully automated dispensing robots enable a wide range of dispensing technologies

Fully automated dispensing robots enable a wide range of dispensing technologies

Automatic dispensing robot can achieve a variety of dispensing technology, mainly because of the three-axis robotic arm, the use of three-dimensional spatial way, to achieve circular gluing technology, only with the X, Y, Z axis of the automatic dispensing robot, can basically achieve the circular gluing technology, the use of the X, Y axis to move back and forth to achieve the circular gluing technology, at present, as long as the three-axis automatic dispensing robot are able to achieve.

06

2023/07

Fully automatic dispensing machine in gold jewellery varnishing application programme

Fully automatic dispensing machine in gold jewellery varnishing application programme

Which automatic dispenser technology can meet the expected requirements for the painting of gold jewellery? Recommend you use vision automatic dispenser, micro-control glue technology and spray paint process are to meet the requirements of low-viscosity glue spraying technology, paint also belongs to the low-viscosity glue, vision automatic dispenser for gold jewellery varnishing is a high-pressure way of spraying, paint from the paint dispensing valve shot, directly will be glued in the jewellery, will not appear the flow of the situation.

06

2023/07

Difficulties in the e-fluoride spraying process

Difficulties in the e-fluoride spraying process

PCB board fluoride coating has been available on many occasions, instead of three-proof paint coating, especially in the field of high-precision electronics, of course, fluoride in the specific spraying process there are still the following process difficulties: Fluoride spraying requires a uniform and stable coating, no scattering, no glue and no waste, to avoid the impact on the performance of the cured coating, resulting in different product quality; fluoride liquid price is high, the incorrect use of the enterprise will increase the production cost, uneven coating will also lead to frequent rework.

06

2023/07

Fluorinated liquid coating process solutions

Fluorinated liquid coating process solutions

For the difficulties of fluorinated liquid dispensing coating, combined with years of experience in the market, SMIC proposes the following fluorinated liquid coating process solutions: I. Fluorinated liquid coating system options SD-1 dispensing controller + dispensing syringe - digital pneumatic pressure regulator, manual and automatic optional control, adjustable suction, built-in air tank, stable pressure, suitable for dispensing and spraying precision requirements are not high, the efficiency requirements of the general process occasions. NV3/NV4 high-precision spray valve - stainless steel body, high compatibility, micro-jet adjustable, split design, three types of nozzle specifications can be selected, suitable for dispensing spraying higher precision, efficiency requirements of the general process occasions. JV-600 high-speed pneumatic injection valve - non-contact spraying dispensing spraying, custom developed solenoid valve can ensure high precision and high repeatability, suitable for dispensing spraying high precision and high efficiency requirements of the process occasions.

06

2023/07

Shamicro Intelligent Controls Mobile Phone Communication Interface Dispensing Process Solution

Shamicro Intelligent Controls Mobile Phone Communication Interface Dispensing Process Solution

After years of technology and experience, SMIC can provide complete dispensing process solutions for mobile phone communication interface. For the previous mobile phone communication interface dispensing process and requirements, SMIC recommends the following dispensing solutions: Option 1: Desktop vision three-axis dispenser + piezoelectric injection valve Process characteristics: Dispensing of mobile phone communication interfaces is done by injection method to avoid bad products caused by contact dispensing. The machine is equipped with CCD machine vision with 3D compensation function, and the whole system is equipped with high-precision branded servo screw control, which can achieve accurate positioning of 0.01mm.

06

2023/07

< 123 > proceed page

MENU

Quick navigation

Leica technology

Company Address

315, Block 7, E, Evergrande Fashion Valley, Fulong Road, Dalang Street,
Longhua District, Shenzhen, China

Contact details

Tel：0755-28153111

Mobile：13662615911

E-mail: sales@zlkte.com

LaiKe

All rights reserved Shenzhen LaiKe Technology Co.

Business licence