Fully automatic dispenser for observation with vision function

Dispensing equipment with vision functions to complete the dispensing accuracy and efficiency than desktop machines have more advantages, equipped with vision functions of the observation of the automatic dispenser needs to be added to a variety of adhesive control of the fluid dispensing valve operation, whether it is applied to the application of a single-component epoxy adhesive or a variety of neutral viscosity adhesive applications can be applied through the valve on the flow of precision control, from the PTC adhesive and fingerprint module filler and other needs of precision and quality industries can be seen in the control of adhesive results. The glue control effect can be seen in PTC bonding and fingerprint module filling industries that require precision and quality.

　　CCD vision system assisted observation of fully automatic dispenser to detect the positioning of the way to confirm the position of the coordinates, and through the pneumatic conveying way to cover the adhesive to bonding and filling position, choose a suitable fluid dispensing valve on the flow control effect is accurate and uniform, built-in cylinder valve body with a sealing material to separate, the use of pneumatic pressure to drive the middle of the screw up and down the ejector pin extrusion mode, anodised stainless steel valve body materials Can be a long time to control the fluid drive glue without the influence of adhesive and damage to the surface material, with the observation of the automatic dispenser with the precision of the glue mode can be applied in the PTC bonding or fingerprint module filling and other industries, this dispensing valve is suitable for a variety of adhesive coating applications, such as coating of one-component epoxy adhesive, coating of paints and inks, coating of sealant and many other types of adhesives.

　　Need to apply single-component epoxy adhesive industry applications, such as PTC bonding or fingerprint module filling applications, PTC that is, thermistor, when it exceeds a certain temperature will make the thermal resistance value rises caused by the use of the impact of the appropriate amount of adhesive coated in the external sealing to protect the waterproof, fingerprint module as much as the need for visual dispensing equipment with fluid dispensing valve to control the viscous material used for heat sealing, in addition to the need for visual precision control of the observational In addition to the need for visual precision control of the observation of the input control of automatic dispensing machines also need a suitable single-component adhesive control of the dispensing valve, so in the filling of PTC adhesive protection bonding and other aspects of the choice of fluid dispensing valve to complete the coating of one-component epoxy adhesive sealing, fingerprint module filling link is also based on the application of the choice of this valve for the coating of the flow of the control work.

    According to the existing report shows that the application of single-component adhesive control of the fluid dispensing valve accounted for a high proportion of the total market, can be visually positioned to control the observation of automatic dispensing machine on the amount of adhesive precision control without a suitable and effective operation of the fluid dispensing valve to use.