High speed injection valve controller LK-9S

Input air pressure: 4.5-7.0 bar (65-100 psi) Air pressure output: 0~0.5Mpa Input power: 220 VAC (+/-10%), 50/60Hz input 5. Working mode Continuous mode Single point mode Switch mode 6. Communication port I/O output DC 0V/24V 7. Controller size: length: 240mm, width: 160mm, height: 92mm Weight: 2000g Operating conditions: Temperature: 5-75 ° C Humidity: 85% RH @ 30 ° C, 40% @ 45 ° C, Altitude: up to 2000 meters (6562 feet)

Affiliated Classification:

Controllers

Keywords:

Product Enquiry

Product Description
Advantage
Specificities
Appliance

1. Input air pressure：4.5–7.0 bar（65–100 psi）
2. Air pressure output: 0~0.5Mpa
3. Input power: 220 VAC (+/-10%), 50/60Hz input
4. Operating mode: continuous mode, single point mode, switch mode
5. Communication port I/O output DC 0V/24V
6. Controller size Length: 240mm Width: 160mm Height: 92mm
7. Weight: 2000g
8. Operating conditions: temperature: 5–75°C
9. Humidity: 85% RH @ 30°C, 40% @ 45°C,
10. Altitude: up to 2000 m (6562 ft)
The valve body is easy to operate, easy to maintain, and easy to clean
Clear and clear control interface for the operator
Suitable for various types of glue feeding paths
Heating device can be placed in any direction
High speed jet valve precise and efficient dispensing, no wire drawing, no glue hanging, and uniform glue control
Capable of achieving a minimum adhesive width of 0.3mm with uniform inner lines
Suitable for various high, medium, and low viscosity adhesives and high-temperature heating adhesives
The valve body can withstand a high temperature of 200 degrees and operate continuously
The heating cylinder can be freely switched between size, model, and adhesive type
Wearing industries such as smartphones, watches, headphones, and other related industries, such as automotive drone display screens, clothing accessories, home decoration, flat panel TV instruments, and meters