News
Difficulties in the e-fluoride spraying process

Difficulties in the e-fluoride spraying process

PCB board fluoride coating has been available on many occasions, instead of three-proof paint coating, especially in the field of high-precision electronics, of course, fluoride in the specific spraying process there are still the following process difficulties: Fluoride spraying requires a uniform and stable coating, no scattering, no glue and no waste, to avoid the impact on the performance of the cured coating, resulting in different product quality; fluoride liquid price is high, the incorrect use of the enterprise will increase the production cost, uneven coating will also lead to frequent rework.

06

2023/07

Fluorinated liquid coating process solutions

Fluorinated liquid coating process solutions

For the difficulties of fluorinated liquid dispensing coating, combined with years of experience in the market, SMIC proposes the following fluorinated liquid coating process solutions: I. Fluorinated liquid coating system options SD-1 dispensing controller + dispensing syringe - digital pneumatic pressure regulator, manual and automatic optional control, adjustable suction, built-in air tank, stable pressure, suitable for dispensing and spraying precision requirements are not high, the efficiency requirements of the general process occasions. NV3/NV4 high-precision spray valve - stainless steel body, high compatibility, micro-jet adjustable, split design, three types of nozzle specifications can be selected, suitable for dispensing spraying higher precision, efficiency requirements of the general process occasions. JV-600 high-speed pneumatic injection valve - non-contact spraying dispensing spraying, custom developed solenoid valve can ensure high precision and high repeatability, suitable for dispensing spraying high precision and high efficiency requirements of the process occasions.

06

2023/07

Shamicro Intelligent Controls Mobile Phone Communication Interface Dispensing Process Solution

Shamicro Intelligent Controls Mobile Phone Communication Interface Dispensing Process Solution

After years of technology and experience, SMIC can provide complete dispensing process solutions for mobile phone communication interface. For the previous mobile phone communication interface dispensing process and requirements, SMIC recommends the following dispensing solutions: Option 1: Desktop vision three-axis dispenser + piezoelectric injection valve Process characteristics: Dispensing of mobile phone communication interfaces is done by injection method to avoid bad products caused by contact dispensing. The machine is equipped with CCD machine vision with 3D compensation function, and the whole system is equipped with high-precision branded servo screw control, which can achieve accurate positioning of 0.01mm.

06

2023/07

Fully automated dismantling production line for power battery packs

Fully automated dismantling production line for power battery packs

New energy vehicle power battery theoretical life of 4-8 years, retired power battery recycling discharge tipping point will arrive. It is expected that the domestic large-scale installation of new energy vehicle power battery around 2017 will usher in the recycling discharge period in 2023. Power batteries are usually recycled in the form of battery packs. The recycling of power batteries is mainly divided into two modes: 1) stepwise utilisation of decommissioned batteries with a lesser degree of capacity degradation; and 2) dismantling of batteries that can't be stepwise utilised and recycling of lithium, nickel, cobalt, manganese, and other materials therein. The gradual utilisation of used batteries refers to the re-utilisation of power batteries through repair, transformation or remanufacturing when the batteries have reached their designed service life, generally at the same level or at a reduced level. Used battery dismantling and recycling refers to the dismantling of used batteries and recovery of the usable resources therein through physical, chemical or biological means.

06

2023/07

< 12 > proceed page

MENU

Quick navigation

Leica technology

Company Address

315, Block 7, E, Evergrande Fashion Valley, Fulong Road, Dalang Street,
Longhua District, Shenzhen, China

Contact details

Tel：0755-28153111

Mobile：13662615911

E-mail: sales@zlkte.com

LaiKe

All rights reserved Shenzhen LaiKe Technology Co.

Business licence