Screw valve controller LK-20
Screw valve controller LK-20

Cyprus Screw valve controller LK-20

Size: 280x105x185 (LxWxH) Weight: 3150g Input power: 220 VAC (+/-10%), 50/60Hz input Starting circuit: 0V contact type or 5-24 VDC starting signal; INIT signal duration: not less than 0.015s instantaneous or stable state Time control range: 0.001~999.9S Input air pressure: 4.5-7.0 bar (65-100 psi) Air pressure output: 0~0.5Mpa Vacuum output: 0~-101Kpa Air pressure delay or advance: maximum 0~999ms Operating modes: time, metering, speed Operating conditions: Temperature: 5-75 ° C Humidity: 85% RH @ 30 ° C, 40% @ 45 ° C, Altitude: up to 2000 meters (6562 feet)

Category:

CyprusControllers

Phone:400-888-8888

Inquire

Product Description

 

  1. Size: 280x105x185 (LxWxH)
  2. Weight: 3150g
  3. Input power: 220 VAC (+/-10%), 50/60Hz input
  4. Start-up circuit: 0V contact or 5–24 VDC start-up signal;
  5. INIT signal duration: not less than 0.015S instantaneous or maintain steady state
  6. Time control range: 0.001~999.9S
  7. Input pressure: 4.5–7.0 bar (65–100 psi)
  8. Air pressure output: 0~0.5Mpa
  9. Vacuum output: 0~-101Kpa
  10. Barometric pressure delay or advance: maximum 0~999ms
  11. Operating modes: time, metering, speed
  12. Operating conditions: temperature: 5–75°C
  13. Humidity: 85% RH @ 30°C, 40% @ 45°C,
  14. Altitude: up to 2000 m (6562 ft)

previous page:

CyprusSpray valve controller LK-S5

CyprusPrecision Dispensing Controller LK-A7

: next page